Titanic T-1 Flash File Without Password
MTK6572 TestEd Hang On Fix Logo Virus Fix
MT6572_NAND_TITANIC_T-1__T-1__zm5_tx_g43a_t1_hj_nd44_2k_b15_fl__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3
Download ON Google Drive By Gsm Mamun Ctg
Action : Read Firmware.
Selected 0-By CPU:MT6572
Exe version: NCKDongle AndroidMTK 2.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM29)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
NAND: (4Gb+4096Mb) [HYNIX] H9DA4GH4JJAMCR_4EM
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 0x20000 PageSize: 0x800 SpareSize: 0x40
Searching partiton table, wait..
Offset: 0x1f5e0000
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM34)
IMEI[1]: 353671080303895
IMEI[2]: 353671080303903
Dumping Preloader.
Partition: PRELOADER
Partition: PRO_INFO
Partition: NVRAM
Partition: PROTECT_F
Partition: PROTECT_S
Partition: SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: MISC
Partition: LOGO
Partition: EXPDB
Partition: FAT
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: BMTPOOL
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x100000
Start processing nvram
IMEI[1] from NVRAM: 353671080303895
IMEI[2] from NVRAM: 353671080303903
Start processing PROTECT_F
Reading: BEGIN: 0x300000 - LEN: 0x180000
Start processing PROTECT_S
Reading: BEGIN: 0x480000 - LEN: 0x180000
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing SEC_RO secro.img
Reading: BEGIN: 0x1280000 - LEN: 0x40000
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x2a20000 - LEN: 0x13100000
Saved to : C:\Users\Mamun\Documents\Android_MTK\firmware_backup\MT6572_NAND_2020_03_12_20_55)
Wait untill phone will start charging.
[0]All done.
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008D , [SAMSUNG] KA100O015E_BJTT/KF94G16Q4V
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID : 0x336F05F3275D0FAE1AFD00D466B38B5C
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
[Read Ok] : preloader_zm5_tx_g43a_t1_hj_nd44_2k_b15_fl.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img
[ScatCFG] : MT6572 / V1.1.1 / zm5_tx_g43a_t1_hj_nd44_2k_b15_fl / NAND
FW Size : 268 MiB
Brand : TITANIC_T-1
ProdName : TITANIC T-1
ProdModel : T-1
Device : zm5_tx_g43a_t1_hj_nd44_2k_b15_fl
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.Band1.2.5.V1.3
Android Info saved
Scatter saved to : C:\Users\Mamun\Desktop\MT6572_NAND_TITANIC_T-1__T-1__zm5_tx_g43a_t1_hj_nd44_2k_b15_fl__4.4.2__ALPS.KK1.MP7.Band1.2.5.V1.3
Done!
Elapsed: 00:02:54
Reconnect Power/Cable!
https://drive.google.com/file/d/1LtUP4kRq1jtkReUmi_eavAjPxUEcTmUW/view?usp=drivesdk
ReplyDelete